How to Properly Repair FCS16 RIP-R-STRIPPER® Tile Stripper Extension Cords | Issue No. 21

How to Properly Repair FCS16 RIP-R-STRIPPER® Tile Stripper Extension Cords

FIGURE 1. Improperly repaired

FIGURE 1. Improperly repaired

FCS16-1000A Extension Cord used with the FCS16 RIP-R-STRIPPER Tile Stripper improperly repaired. FIGURE 1.

In this case, it is presumed the RIP-R-STRIPPER Blade had come in contact with the extension cord and accidently cut it. Unfortunately, the Technician did not repair the cord according to National Electric Code practices by using the electrical tape. A replacement extension cord is expensive and you can save money by properly repairing a damaged cord.

 Need help?
Call us at 800.533.0524, or
email: support@generalequip.com.

Improper electrical cable splicing techniques can result in property damage and /or personal injury!


It is not legal to splice electrical extension cords.
Even if you solder the wire, wrap each wire with electrical tape and encase the whole splice in heat shrinkable tubing, it still will not have the abrasion resistance of a new cord. Plus, this practice is not permitted under the National Electric Code.

FIGURE 2.

FIGURE 2.

Instead, install a high quality NEMA L5-15P locking male plug and NEMA L5-15R locking female receptacle to the cut/severed extension cordends. These devices have a twist lock feature which will prevent them from separating when the extension cord is pulled around during normal tile stripping job applications. A typical NEMA L5-15P Locking Male Plug and a typical NEMA L5-15R Locking Female Receptacle are both depicted in FIGURE 2.

These electrical cable connecting devices are readily available in the field. Follow the installation instructions provided. Not using devices with the twist lock feature will allow the plug and receptacle to separate as the RIP-R-STRIPPER moves around on the jobsite.

 

Always follow repair procedures as specified by the current National Electric Code. Remember…safety is everyone’s responsibility!

 

If you have any questions or comments, please feel free to contact us.
Telephone: 800.533.0524 | Email: support@generalequip.com

Improper Throttle Cable Installation for the Two Man Auger | Issue No. 20

Improper Throttle Cable Installation for the Two Man Auger

Improper throttle cable install can increase the potential for personal injury. FIGURE 1.

The throttle cable installation depicted will significantly reduce operator control while using the twist grip throttle system and could directly contribute to personal injury.

  1. Extended use of this installation can allow the throttle cable to be severed by the carburetor throttle mechanism leading and could directly contribute to personal injury.
  2. Correct installation will position and secure the Part Number 330-0320 Swivel Assembly in the hole provided on the carburetor throttle mechanism. The 330-0320 Swivel Control is designed to rotate as necessary to minimize throttle cable wear and provide for enhanced operator control. FIGURE 2.

To help reduce the potential for personal injury, it is critical for all throttle mechanism components be properly installed and maintained. The throttle control system must be inspected every time the Two Man Auger is turned. Refer to the applicable Tool Turning Tips publication for additional information. http://www.generalequip.com/Library. Form: GEF16101202.

Check your General hole digging equipment TODAY and every time tools are rented to determine the throttle cable is properly installed as outlined in the appropriate Operator Manual. Have questions or need help? Contact our Customer Service Department for assistance. 1.800.533.0524 or sales@generalequip.com

Remember: Safety is everyone’s responsibility!

Need help?
Call us at 800.533.0524, or
email: support@generalequip.com.

FIGURE 1. Improper Install

eHelp20p_ImgB

FIGURE 2. Proper Install

 If you have any questions or comments, please feel free to contact us.
Telephone: 800.533.0524 | Email: support@generalequip.com

Replacement Bluffton Motor Parts? | Issue No. 09

How do You Purchase Replacement Electric Motor parts for the General FCS16 RIP-R-STRIPPER?

1) Replacement parts, service and warranty support for the Bluffton electric motor are provided by members of the Electrical Apparatus Service Association, Inc. (EASA). Consult your local Yellow Pages under ELECTRIC MOTORS, or call 314.993.2220 for assistance. General Equipment Company DOES NOT supply replacement parts, service or warranty support for the electric motor with the exception of:

  • Thermal relief switch (red button)
    Part Number: FCS16-0025
     
  • Start and run capacitors
    Part Number: FCS16-0470

Need help?
Call us at 800.533.0524, or
email: support@generalequip.com.

2) To order replacement parts or obtain service for the Bluffton electric motor contact Electrical Apparatus Service Association, Inc. (EASA). Consult your local Yellow Pages under ELECTRIC MOTORS, or call 314.993.2220 for assistance. or www.easa.com.  It’s fast and easy to use!

3) Need help for anything not related to the motor? Call us at 800.533.0524, or email: support@generalequip.com.

 4) If you need a replacement parts diagram for the FCS16 RIP-R-STRIPPER, it’s fast and easy to download and print a copy from the LIBRARY section of our website: www.generalequip.com.

5) Replacement stripper blades are provided by General Equipment Company.

If you have any questions or comments, please feel free to contact us.
Telephone: 800.533.0524 | Email: support@generalequip.com

Replacement Honda Engine parts? | Issue No. 08

How do You Purchase Replacement Honda Engine parts for the General 330H two Man Hole Digger?

1) Replacement parts, service and warranty support for the Honda GXV160  engine used with our 330H Hole Digger are provided by MTA. General Equipment Company DOES NOT supply replacement engine parts, with the exception of:

  • Muffler and exhaust deflector.
  • Throttle cable attach swivel fiting.
  • Throttle cable.

2) Need a copy of the official parts manual for the engine? Call MTA at 1.800.264.0225 or www.mtadistributors.com

 

Need help?
Call us at 800.533.0524, or
email: support@generalequip.com.

3) For ordering parts form Robin America go to their website: www.robinamerica.com.

4) Need help for anything not related to the engine? Call us at 800.533.0524, or email: support@generalequip.com.

5) If you need a replacement Operator Manual for the 330H Hole Digger, it’s fast and easy to download and print a copy from the LIBRARY section of our website: www.generalequip.com


 If you have any questions or comments, please feel free to contact us.
Telephone: 800.533.0524 | Email: support@generalequip.com

Replacement Subaru Engine parts? | Issue No. 07

How do You Purchase Replacement Subaru Engine parts for the General 240 One Man Hole Digger?

1) Replacement parts, service and warranty support for the Subaru EH035V engine used with our 240 Hole Digger are provided by Robin America. General Equipment Company DOES NOT supply replacement engine parts.

2) Need a copy of the official parts diagrams for the engine? Just download and print a copy from the LIBRARY section of our website: http://www.generalequip.com/library.php.

Need help?
Call us at 800.533.0524, or
email: support@generalequip.com.

3) For ordering parts from Robin America go to their website: www.robinamerica.com.

 4) Need help for anything not related to the engine? Call us at 800.533.0524, or email: support@generalequip.com.

5) If you need a replacement parts diagram for the 240 Hole Digger, it’s fast and easy to download and print a copy from the LIBRARY section of our website: www.generalequip.com.

If you have any questions or comments, please feel free to contact us.
Telephone: 800.533.0524 | Email: support@generalequip.com